Strautmann Giga-Vitesse CFS 4001

Pick-up (pick-up)
- 2.00 m wide, unsteerable pick-up with 6 rows of tines
arranged in a V shape, the guide roller in front of the baffle plate
- plastic scraper
- accelerating CFS roller driven by gears,
secured by a friction clutch
Feeder unit
- spiral rotor with 8 rows of teeth, Ø 840 mm, 1640 mm wide
- completely welded rings with steel teeth
fine-grained
- 17 mm wide plates with welded Hadrox knives
- drive via a large spur gear
Cutting mechanism
- 45 knives on one surface for 35 mm theoretical length
cuts
- knife for double-sided use thanks to its double blade
- single knife protection with quick-change system for assembly and disassembly without tools
- the cutter bar is hydraulically extended and adjusted via
threaded spindles
Body
- fully closed steel superstructure with entrance door,
ladder without superstructure bows and ropes
- front wall with integrated automatic mechanism
loading and directing baffle for optimal flow
charge flow
- stable tailgate with mechanical locking
1 x cargo hold light (front right), 1 x work light (z
rear right on the fender)
- LED lighting
Floor conveyor
- hydraulic scraper conveyor with stepless regulation
- middle hydraulic drive with OMP 125 and 2
gradual shifting and reversing
- variant with wooden floor: - four 11 mm thick chains
round steel with a breaking load of 15 t per chain
- variant with steel floor: - four wear-resistant,
Maintenance-free leaf chains
Drive
- rotational speed of the power transmitter shaft 1000 U/min
Hook
- hydraulic articulated drawbar with two double-acting drawbars
valves and foldable support foot
- drawbar amortization using a nitrogen container

4 x wheels set 800/45 R 26.5

2 peripheral air brakes with ALB FAD axles

Driving direction detection for convergent steering

PTO shaft with cam clutch 2000 Nm
both sides wide-angle Z=6 1 3/8 ''

The upper part of the front flap is hydraulically tilted
direct connection to the tractor

Additional feeler wheels behind the pick-up